Conductor 'x' conductor x and dj morph - lux in tenebris


You're currently on {{currently_on}}. However, it looks like you listened to {{listened_to}} on {{device_name}} {{time}}.

Step 2 - Select the conductor to comply with (A), which requires the branch-circuit conductor to be sized no less than 125% of the continuous load, 23A x 125% = . The conductor is selected to the 75°C temperature rating of the equipment terminals in accordance with Table (B)(16). In this case, 10 THHN having a rating of 35A at 75°C is suitable. Step 3 - We must ensure the conductor is protected against overcurrent in accordance with the requirements of . Again in this case, 10 THHN (from Step 2) rated 35A [Table (B)(16) is protected by the 30A protection device. Feeder Continuous Load Example What size feeder overcurrent protection device and conductor (THHN) is required for a 184A continuous load on a panelboard (75°C terminals). Step 1 - Size the overcurrent device in accordance with . The feeder overcurrent device must be sized not less than 125% of 184A, 184A x 125% = 230A. According to (A) we must select a minimum 250A overcurrent device. Step 2 - Select the conductor to comply with , which requires the feeder conductor to be sized no less than 125% of the continuous load, 184A x 125% = 230A. We must select the conductor according to the 75°C temperature rating of the panelboards terminals [(C)] - 4/0 THHN has a rating of 230A at 75°C will meet this requirement. Step 3 - Verify the conductors selected in Step 2 is properly protected against overcurrent in accordance with . The 4/0 AWG conductor from Step 2 is rated 230A at 75°C, it is permitted to be protected by a 250A protection device in accordance with the "the next size up rule" of (B).
Free Commercial / Industrial Wiring and Raceway Chart


ConDuctor 'X' Conductor X and DJ Morph - Lux In TenebrisConDuctor 'X' Conductor X and DJ Morph - Lux In TenebrisConDuctor 'X' Conductor X and DJ Morph - Lux In TenebrisConDuctor 'X' Conductor X and DJ Morph - Lux In Tenebris

khavg.xtremecomputing.us